Must be 21 or older to purchase.
This PAMAX Tactical Inc. PMT-9 “Mo-Fett “Pistol offers a superior quality finish and is built with components that are proudly made in the USA. This models feature an in-house designed “Shades of ODG” color scheme using both our proprietary XSlick coating and cerakote.
Designed to provide precision and reliability that your life depends on. All of our firearms come with a warranty which we stand behind. These PMT-9 platforms are designed to withstand abuse, offer high quality USA parts, and outperform the competition.
Our in house machined AR9 billet lower/upper receivers are machined from a solid brick of 7075-T6 aluminum to provide a higher quality tier over 6061-T6. All of the critical features and dimensions are cut in a single operation, ensuring that every receiver is perfectly in spec. We then broach the magazine well for a perfect magazine fit, hand deburr, and tumble before coating. These receivers have an integrated magazine release and feature last round bolt hold open. The receiver bolt catch holes are threaded, eliminating the standard roll pin. The rear detent is also retained by a threaded cap screw making maintenance a breeze.
Our billet uppers are also made from 7075-T6 aluminum and are matched with the lower. Dedicated PCC design to cut weight and streamline functionality of the pistol caliber carbine.
The upper receiver is paired with a 7” 6061-T6 CNC machined billet handguard. The MLOK handguard features superior tensile strength and is designed to endure heavy impact without throwing your iron sights or optic out of alignment. The handguard mates direct to the upper and features anti-rotational tabs. The handguard is installed using our steel low profile barrel nut which requires no timing as it fits under the gas system.
The 4.5" barrel is produced from raw bar stock to finished product. The barrel is properly stress relieved after rifling, and extensions are torqued after nitride. Superior qualified with a flash can. This combo offers smooth performance and deflects gases forward. Ideal for the PCC as home defense system.
• 5.5" Length
• 9x19mm Chamber
• 1:10 RH Twist
• 4150 CMV
• Stress relieved after rifling
• Blacknitride+ finish by H&M
• Weight: 11.1 ounces
• 100% American Made
BOLT CARRIER GROUP:
Properly Built. No Corners Cut. 100% USA Made. Lifetime Guarantee. The BCG is a critical component with the most moving parts. We designed these BCG to run and run hard.
• 8620 Single Piece Bolt
o Blacknitride+™ by H&M
o Heat Treated
o AR15 Style Extractor
o 17-4 Stainless Steel Firing Pin with Spring
o Full Auto Compatible
• 100% American Made
LOWER PARTS - 3.5LB TRIGGER
Contained within the lower we use 100% USA Made parts, all the way down to the very spring and detent. This milspec parts kit includes a flat edge trigger and hammer made from 8620 Steel Phosphate coated. We tune all our triggers at installation to ensure a crisp, no slop, trigger pull. The fire control group features a 3.5LB trigger pull and is secured with a set of our anti-walk pins. We tipped it off with extended takedown pins and enhanced bolt catch profile. We used a crisp Armaspec 45 degree ambidextrous ssafety.The safety is also capable to being changed to 90 degree if the user prefers. Last but not least a very comfortable pistol grip by Reptilia Corp.
Ambidextrous Charging Handle by Brace Built. Quality USA product that offers a very sleek visual and plenty of real-estate for pull starting this PCC.
BUFFER TUBE & BRACE
The buffer tubes are CNC machined from 6061-T6 aluminum and are significantly stronger then generic forged tubes. Pistol brace configuration with machined dimples for the use of the included Shockwave Brace. Our castle nut is properly torqued and staked to prevent movement. The endplate features a QD mount for sling attachments. The buffer is 5.5oz and the spring is a specially made Armaspec (3) coil system to reduce felt recoil and remove the “twang” noise typical in most AR platforms.
Build Overview Features:
PMT-9 7075 Billet PAMAX Tactical Lower Receiver
7075 Billet Matched Upper Receiver
6061 Matched Billet MLOK 7" Handguard
9mm 5.5” Barrel w/Flash Can
PCC 9mm BCG
Tuned Flat Edge Trigger - 3.5LB
45 Degree Ambi Safety
Extended Takedown Pins
Enhanced Bolt Catch / Release
(1) 35rd Glock Profile Magazine – FDE by Toolman Tactical
Brace Built Ambidextrous Charging Handle
Billet 6061 Buffer Tube w/QD sling plate
Reptilia Corp Pistol Grip
Custom “Shades of ODG” Cerakote & XSlick color scheme.
Atibal Red Dot (NOT INCLUDED)
*** Please note, this is a restricted item and must ship to a Federally licensed gun dealer. Item will ship with a copy of our FFL for your dealer records. You will have an opportunity to upload a copy of your dealer's FFL at checkout. If you do not have a copy, simply have your dealer email a copy to email@example.com along with the order number. You order will not ship until we have a copy of the receiving dealer's FFL on file.