Must be 18 or older to purchase.
100% USA MANUFACTURED
This PAMAX Tactical Inc. PMT-10 with a 18” Ballistic Advantage Premium Black Series Barrel, Superlative Adjustable Gas System and HADES 2 Muzzle Device makes for a perfect pairing for a battle rifle. A beautiful piece professionally coated in our “Shades of ODG” custom color scheme. Fully loaded with XSLICK Coated AR10 Profile BCG to provide easy cleaning, enhanced lower parts kit, upgraded buffer system, and our tuned flat edge 3.5lb trigger.
All of our firearms come with a warranty which we stand behind. These rifles are designed to withstand abuse, offer high-quality USA parts, and outperform the competition, all while staying within an affordable price point.
Our in-house machined AR10 billet lower/upper receivers are machined from a solid brick of 7075-T6 aluminum to provide a higher quality tier over 6061-T6. All of the critical features and dimensions are cut in a single operation, ensuring that every receiver is perfectly in spec. We then broach the magazine well for a perfect magazine fit, hand deburred, and tumble before coating. These builds also have an integrated ambidextrous bolt catch, offering a functional and sleek feature. The receiver bolt catch holes are threaded for included screws, eliminating your standard roll pin. The rear detent is also retained by a threaded cap screw making maintenance a breeze.
The upper receiver is machined from 7075 T6 aluminum, ensuring a rugged and strong upper with a type III military anodizing. Our AR10 Uppers do not feature a forward assist.
The upper receiver is paired with a 15” 6061-T6 CNC machined billet handguard. The MLOK handguard features superior tensile strength and is designed to endure heavy impact without throwing your iron sights or optic out of alignment. The handguard mates direct to the upper and features anti-rotational tabs. The handguard is installed using our steel low profile barrel nut which requires no timing as it fits under the gas system.
BARREL: BALLISTIC ADVANTAGE
This .308 chambered (DPMS style) 18 inch barrel is machined from 416R Stainless Steel with a QPQ Corrosion Resistant finish. Our Premium Series Barrels are HP and MPI tested, ensuring the best in quality and accuracy.
Material: 416R Stainless Steel
Finish: QPQ Corrosion Resistant
Twist: 1:10 inches
Gas Length: Mid-Length
Gas Block Journal: 1.03″ Gas Block Seat for .875″ Low Profile Gas Blocks Only
Thread Pitch: 5/8x24 Threaded
Other: HP and MPI Tested
BOLT CARRIER GROUP:
Properly Built. No Corners Cut. 100% USA Made. Lifetime Guarantee. The BCG is a critical component with the most moving parts. We designed these BCG to run and run hard. Better yet, it features our proprietary XSLICK coating to increase cyclic rate, decrease friction, provide ease of cleaning and offer better resistance to heat and the elements.
8620 DPMS style carrier with XSLICK Finish
Properly heat treated
Final grind before plating
9310 or S7 .308/7.62mm bolt
H&M Black Nitride finish
4140 billet gas key
Properly seated with Grade 8 fasteners
Properly staked to ensure reliability
4140 Cam Pin nitride treated for wear resistance
Billet Machined Extractor
Machined from solid 4140 bar stock, heat treated and shot peened
Phosphate coated for reliable extraction
Extractor insert included
Firing pin precision machined from 17-4 H-900 Stainless Steel
100% USA Made
Armaspec Ambi Charging Handle
GAS SYSTEM: ADJUSTABLE
The .875 Superlative Arms Adjustable Gas Block for the most effective gas regulation and easily adjusted for supressor use.
LOWER PARTS - 3.5LB DROP IN
Contained within the lower we use 100% USA Made parts, all the way down to the very spring and detent. Our enhanced parts kit includes a tuned flat 3.5lb trigger and hammer. We tune all our triggers at installation to ensure a crisp, no slop, trigger pull. We topped it off with extended takedown pins and enhanced bolt catch profile. We used a crisp Armaspec 45 degree ambidextrous safety. The safety is also capable to being changed to 90 degree if the user prefers. Last but not least a very comfortable pistol grip by Reptilia Corp.
A mil-spec dust cover is installed.
BUFFER TUBE & STOCK
A Magpul UBR Stock System utilizing a .308 Buffer.
Build Overview Features:
• PMT-10 7075 Billet PAMAX Tactical Lower Receiver
• 7075 Billet Upper Receiver
• 15” Handguard
• 18" .308 Caliber Barrel
• XSLICK ODG BCG
• HADES 2 Muzzle Device
• Rifle Length Gas System
• Superlative Arms Gas System
• Tuned Flat Edge Trigger - 3.5LB
• Extended Takedown Pins
• Reptilia Pistol Grip
• (1) 20rd Magazine
• Ambi Armaspec Charging Handle
• UBR Magpul Stock
• Integrated Bolt Catch
• Enhanced Armaspec 45 Degree Ambi-Safety
*** Please note, this is a restricted item and must ship to a Federally licensed gun dealer. Item will ship with a copy of our FFL for your dealer records. You will have an opportunity to upload a copy of your dealer's FFL at checkout. If you do not have a copy, simply have your dealer email a copy to firstname.lastname@example.org along with the order number. Your order will not ship until we have a copy of the receiving dealer's FFL on file.