Description
Must be 18 or older to purchase.
This PAMAX Tactical Inc. AR-15 Rifle offers a superior quality finish and is built with components that are proudly made in the USA. Offering the same precision and reliability that your life depends on but geared a bit more around ease of use to deploy in tighter spaces. This rifle offers a a sub 1" MOA @ 100yards with a lightweight overall weight of 6lb 8oz. All of our firearms come with a warranty which we stand behind. These rifles are designed to withstand abuse, offer high quality USA parts, and outperform the competition, all while staying within a pricepoint that is affordable.
RECEIVER SET:
Our in house machined AR15 billet lower receivers are machined from a solid brick of 7075-T6 aluminum to provide a higher quality tier over 6061-T6. All of the critical features and dimensions are cut in a single operation, ensuring that every receiver is perfectly in spec. We then broach the magazine well for a perfect magazine fit, hand deburr, and tumble before coating. These builds also have an integrated ambidextrous bolt catch, offering a functional and sleek feature. The receiver bolt catch holes are threaded for included screws, eliminating your standard roll pin. The rear detent is also retained by a threaded cap screw making maintenance a breeze.
Our lightweight billet uppers are also made from 6061-T6 aluminum. The upper has a deleted forward assist and dust cover.
HANDGUARD:
The upper receiver is paired with a 13” 6061-T6 CNC machined billet handguard. The MLOK handguard features superior tensile strength and is designed to endure heavy impact without throwing your iron sights or optic out of alignment. The handguard mates direct to the upper and features anti-rotational tabs. The handguard is installed using our steel low profile barrel nut which requires no timing as it fits under the gas system.
BARREL:
The 16" barrel is produced from raw bar stock to finished product. The barrel is properly stress relieved after rifling, and extensions are torqued after nitride. Superior quality control system ensures that all barrels are dimensionally correct and bores fall well within their individual tolerance.
Barrel Specs:
- 16" Length
- 5.56 Chamber
- Mid-Length Gas System
- .750" Gas Block Journal
- .076" Gas Port Size
- 1:7 RH Twist
- 4150 CMV
- Threaded 1/2-28
- Stress relieved after rifling
- M4 Extension
- 100% USA Made
BOLT CARRIER GROUP:
Properly Built. No Corners Cut. 100% USA Made. Lifetime Guarantee. The BCG is a critical component with the most moving parts. We designed these BCG to run and run hard. Better yet, we coated the carrier in our performance XSlick coating to increase cyclic rate, decrease friction, provide ease of cleaning and offer better resistance to heat and the elements.
BCG Specs:
8620 M16 style carrier with XSLICK Finish
Properly heat treated
Final grind before plating
9310 or S7 5.56/.223 bolt
Heat treated
Shot peened
MPI
4140 billet gas key
Properly seated with Grade 8 fasteners
Properly staked to ensure reliability
Billet Machined Extractor
Machined from solid 4140 bar stock, heat treated and shot peened
Phosphate coated for reliable extraction
Extractor insert included
O-Ring included
Firing pin precision machined from 17-4 H-900 Stainless Steel
100% USA Made
MUZZLE DEVICE:
Our HADES 2 Muzzle Device is made in house and is a hybrid compensator by design. The HADES provides some of the best performance on the market and has up to a 90% reduction of muzzle rise and muzzle sway while reducing felt recoil to a point of non-exsistance. The Gen2 HADES is patterned to reduce gas blowback while keeping the volume at an acceptable level on high pressure cartridges.
GAS SYSTEM:
The .750 gas block is machined from 4140 pre-hardened steel with black Nitride coating. The gas tube is machined from seamless stainless steel tubing. As always you have comfort that even the smaller parts are USA Made.
LOWER PARTS - 3.5LB DROP IN TRIGGER
Contained within the lower we use 100% USA Made parts, all the way down to the very spring and detent. We tune all our triggers at installation to ensure a crisp, no slop, trigger pull. The fire control group features a 3.5LB trigger pull with flat profile trigger. Highlighted are the Magpul Stock, enhanced magazine release, and extended takedown pins. Last but not least a very comfortable pistol grip by Reptilia Corp.
UPPER PARTS
PAMAX Tactical Ambidextrous Charging Handle.
BUFFER TUBE & STOCK
A Magpul collapsible stock keeps this build compact but still comfortable to shoot with six positions of adjustment. The stock has embedded sling mounts for your sling system. The buffer is a standard carbine weight.
Build Overview Features:
- PMT-15 7075 Billet PAMAX Tactical Lower Receiver
- 6061 Billet Upper Receiver
- 6061 Matched Billet MLOK 13" Handguard
- 16" Nitride 5.56 Caliber Barrel Pin & Weld( Compatible with 5.56/.223 ammunition)
- XSlick BCG
- HADES 2 Muzzle Device
- Mid-Length Length Gas System with Steel Gas Block
- Flat Profile Trigger - 3.5LB Tuned
- Extended Takedown Pins
- Enhanced Magazine Release
- (1) 30rd Magazine
- PAMAX Ambidextrous Charging Handle
- Magpul Stock
- Reptilia Corp Pistol Grip
- Custom American Flag Cerakote
- Atibal Scope & Mount (NOT INCLUDED)
- Weight: 6lb 8oz
*** Please note, this is a restricted item and must ship to a Federally licensed gun dealer. Item will ship with a copy of our FFL for your dealer records. You will have an opportunity to upload a copy of your dealer's FFL at checkout. If you do not have a copy, simply have your dealer email a copy to sales@pmtactical.com along with the order number. You order will not ship until we have a copy of the receiving dealer's FFL on file.
