Description
Must be 18 or older to purchase.
This PAMAX Tactical Inc. AR-15 Rifle offers a superior quality finish and is built with components that are proudly made in the USA. Designed around a RECCE rifle build to provide precision and reliability that your life depends on. This rifle offers a a sub 1" MOA @ 100yards with a lightweight overall weight of 6lb 9oz. All of our firearms come with a warranty which we stand behind. These rifles are designed to withstand abuse, offer high quality USA parts, and outperform the competition, all while staying within a pricepoint that is affordable.
RECEIVER SET:
Our in house machined AR15 billet lower/upper receivers are machined from a solid brick of 7075-T6 aluminum to provide a higher quality tier over 6061-T6. All of the critical features and dimensions are cut in a single operation, ensuring that every receiver is perfectly in spec. We then broach the magazine well for a perfect magazine fit, hand deburr, and tumble before coating. These builds also have an integrated ambidextrous bolt catch, offering a functional and sleek feature. The receiver bolt catch holes are threaded for included screws, eliminating your standard roll pin. The rear detent is also retained by a threaded cap screw making maintenance a breeze.
Our billet uppers are also made from 7075-T6 aluminum and are matched with the lower. The upper features a forward assist and is built to withstand heavy use.
HANDGUARD:
The upper receiver is paired with a 13” 6061-T6 CNC machined billet handguard. The MLOK handguard features superior tensile strength and is designed to endure heavy impact without throwing your iron sights or optic out of alignment. The handguard mates direct to the upper and features anti-rotational tabs. The handguard is installed using our steel low profile barrel nut which requires no timing as it fits under the gas system.
BARREL:
The 13.9" barrel is produced from raw bar stock to finished product. The barrel is properly stress relieved after rifling, and extensions are torqued after nitride. Superior quality control system ensures that all barrels are dimensionally correct and bores fall well within their individual tolerance. This model uses a 13.9" barrel which we then add our muzzle device and pinned and welded together. This provides a rifle with the shortest length possible without requiring a tax stamp.
Barrel Specs:
- 13.9" Length - Muzzle Pinned and Welded to 16"
- 5.56 OR (Optional .300 Blackout on request)
- Mid-Length Gas System (Pistol Length .300 Blackout)
- .750" Gas Block Journal
- .076" Gas Port Size
- 1:7 RH Twist
- 4150 CMV
- Threaded 1/2-28
- Stress relieved after rifling
- H&M Black Nitride Finish
- M4 Extension
- Weight: 29.0 ounces
- 100% USA Made
BOLT CARRIER GROUP:
Properly Built. No Corners Cut. 100% USA Made. Lifetime Guarantee. The BCG is a critical component with the most moving parts. We designed these BCG to run and run hard. Better yet, we coated the carrier in our performance XSlick coating to increase cyclic rate, decrease friction, provide ease of cleaning and offer better resistance to heat and the elements. Ideal for keeping your system clean while running suppressed.
BCG Specs:
8620 M16 style carrier with XSLICK Finish
Properly heat treated
Final grind before plating
9310 or S7 5.56/.223/.300 bolt
Heat treated
Shot peened
MPI
4140 billet gas key
Properly seated with Grade 8 fasteners
Properly staked to ensure reliability
Billet Machined Extractor
Machined from solid 4140 bar stock, heat treated and shot peened
Phosphate coated for reliable extraction
Extractor insert included
O-Ring included
Firing pin precision machined from 17-4 H-900 Stainless Steel
100% USA Made
MUZZLE DEVICE:
We pin and weld a Dead Air (keymount) muzzle device to make the barrel a legal 16” rifle length and ready for your suppressor.
(OPTIONAL MUZZLE DEVICES CAN BE PIN & WELDED ON REQUEST)
GAS SYSTEM:
The .750 adjustable gas block is machined from 4140 pre-hardened steel with black Nitride coating. The gas tube is machined from seamless stainless steel tubing. As always you have comfort that even the smaller parts are USA Made. Ideal for fine tuning supressor options.
LOWER PARTS - 3.5LB TUNED FLAT TRIGGER
We use 100% USA Made parts, all the way down to the very spring and detent. We tune all our triggers at installation to ensure a crisp, no slop, trigger pull. The trigger features a 3.5LB trigger pull with a clean breaking point that can be adjusted. Highlighted are the Reptilia Recce Stock, enhanced magazine release, extended takedown pins and ambidextrous safety. Last but not least a very comfortable pistol grip by Reptilia Corp.
UPPER PARTS
Included is our R.I.P.AR Ambidextrous Charging Handle is our in house billet charging handle that offers a sleek profile and comfortable grip. A mil-spec forward assist and a mil-spec dust cover are installed.
BUFFER TUBE & STOCK
RECC·E Stock features a constant cheek weld, ambidextrous QD sling attachment points, rubber buttpad, and a modular design that allows usage of a standard AR15 carbine buffer system, or A5/SR25 carbine buffer system by replacing the receiver extension (buffer tube) and forward portion of the stock. Weighing only 12.0 ounces including the proprietary AR15 carbine-length receiver extension, the RECC·E stock is the ideal lightweight solution for the entire spectrum of AR-pattern guns from compact to precision.
Build Overview Features:
- PMT-15 7075 Billet PAMAX Tactical Lower Receiver
- 7075 Billet Matched Upper Receiver
- 6061 Matched Billet MLOK 13" Handguard
- 13.9" Nitride Caliber Barrel Pin & Weld( Compatible with 5.56/.223 ammunition) Other calibers can be made on request.
- XSlick BCG
- Dead Air Supressor Ready Muzzle Device
- Mid-Length Length Gas System Adjustable Steel Gas Block
- Anti-Walk Pins
- 3.5LB Tuned Flat Trigger
- 90 Degree Ambi Safety
- Extended Takedown Pins
- Enhanced Magazine Release
- (1) 30rd Magazine
- Milspec forward assist
- R.I.P.AR Ambidextrous Charging Handle
- Reptilia RECCE Stock
- Reptilia Corp Pistol Grip
- Black MIL-III Anodizing
- Weight: 6lb 9oz
*** Please note, this is a restricted item and must ship to a Federally licensed gun dealer. Item will ship with a copy of our FFL for your dealer records. You will have an opportunity to upload a copy of your dealer's FFL at checkout. If you do not have a copy, simply have your dealer use the FFL TOOL to upload the needed documentation. You order will not ship until we have a copy of the receiving dealer's FFL on file.
