null

PMT-15 Woodland XSlick .223/5.56 16" DMR Rifle

$1,395.95
(No reviews yet) Write a Review
SKU:
PMTWD16DMR-

Maximum file size is 524288KB, file types are bmp, gif, jpg, jpeg, jpe, jif, jfif, jfi, png, wbmp, xbm, tiff, .pdf

Description

Must be 18 or older to purchase.

 

This PAMAX Tactical Inc. AR-15 Rifle offers a superior quality finish and is built with components that are made in the proudly USA.  Designed with a "DMR" in mind, this platform is truly performance driven and provides precision and reliability that your life depends on. This rifle features a premium nitride barrel sub 1" MOA @ 100yards. We attached our patented HADES Hybrid Compensator to the weapon platform to provide a near 90% reduction in felt recoil, muzzle sway, and muzzle climb.

The beautifully hand coated Woodland Camoflauge is designed for the match set with a seamless pattern. We added an extended charging handle for working around optics, tuned a 3.5lb trigger,  and integrated sling mounts to make this the perfect rifle choice. Add an Atibal XP6 variable optic to really complete the DMR setup.

All of our firearms come with a warranty which we stand behind. These rifles are designed to withstand abuse, offer high quality USA parts, and outperform the competition, all while staying within a pricepoint that is affordable.

RECEIVER SET:

Our in house machined AR15 billet lower/upper receivers are machined from a solid brick of 7075-T6 aluminum to provide a higher quality tier over 6061-T6. All of the critical features and dimensions are cut in a single operation, ensuring that every receiver is perfectly in spec.  We then broach the magazine well for a perfect magazine fit, hand deburr, and tumble before coating. These builds also have an integrated ambidextrous bolt catch, offering a functional and sleek feature. The receiver bolt catch holes are threaded for included screws, eliminating your standard roll pin. The rear detent is also retained by a threaded cap screw making maintenance a breeze.

Our billet uppers are also made from 7075-T6 aluminum and are matched with the lower. The upper features a forward assist and is built to withstand heavy use.

HANDGUARD:

The upper receiver is paired with a 13” 6061-T6 CNC machined billet handguard. The MLOK handguard features superior tensile strength and is designed to endure heavy impact without throwing your iron sights or optic out of alignment. The handguard mates direct to the upper and features anti-rotational tabs. The handguard is installed using our steel low profile barrel nut which requires no timing as it fits under the gas system.

BARREL:

The 16" barrel is produced from raw bar stock to finished product. The barrel is properly stress relieved after rifling, and extensions are torqued after nitride. Superior quality control system ensures that all barrels are dimensionally correct and bores fall well within their individual tolerance. 

Barrel Specs:

  • 16" Length
  • 5.56 NATO Chamber
  • Carbine Length Gas System
  • .750" Gas Block Journal
  • .076" Gas Port Size
  • 1:7 RH Twist
  • 4150 CMV
  • Threaded 1/2-28 
  • Stress relieved after rifling
  • Stainless Finish
  • M4 Extension
  • Weight: 29.0 ounces
  • 100% USA Made

BOLT CARRIER GROUP:

Properly Built. No Corners Cut. 100% USA Made. Lifetime Guarantee. The BCG is a critical component with the most moving parts.  We designed these BCG to run and run hard. Better yet, we coated the carrier in our performance XSlick "WOODLAND" coating to increase cyclic rate, decrease friction, provide ease of cleaning and offer better resistance to heat and the elements.

BCG Specs:

8620 M16 style carrier with XSLICK Finish
Properly heat treated
Final grind before plating
9310 or S7 5.56/.223 bolt
Heat treated
Shot peened
H&M Black Nitride finish
MPI
4140 billet gas key
Properly seated with Grade 8 fasteners
Properly staked to ensure reliability
4140 Cam Pin nitride treated for wear resistance
Billet Machined Extractor
Machined from solid 4140 bar stock, heat treated and shot peened
Phosphate coated for reliable extraction
Extractor insert included
O-Ring included
Firing pin precision machined from 17-4 H-900 Stainless Steel
100% USA Made

MUZZLE DEVICE:

Our Hades Hybrid Muzzle Device is made in house and is well known for its patented performance. As a hybrid the device performs as a brake, comp and flash hider. The HADES pitches gas rearward at an angle to maximize performance. The HADES has a satisfaction guarentee and boasts a 90% reduction in felt recoil, vertical muzzle climb and muzzle sway. This maximizes effectiveness with rapid follow up shots. The HADES also has machined internal channels to assist with burn off of unburnt powder, providing a smaller light signiture over competing devices. Proudly made in the USA.

GAS SYSTEM:

The .750 gas block is machined from 4140 pre-hardened steel with H&M Black Nitride coating. The gas tube is machined from seamless stainless steel tubing. As always you have comfort that even the smaller parts are USA Made. Our. Gas block is CNC "Caged" cut to reduce weight and disperse heat.

LOWER PARTS

Contained within the lower we use 100% USA Made parts, all the way down to the very spring and detent. This milspec parts kit includes a trigger and hammer made from 8620 Steel Phosphate coated. We tune all our triggers at installation to ensure a crisp, no slop, trigger pull. The fire control group is secured with a set of milspec pins but can be upgraded to our anti-walk pins. The pistol grip is upgraded to a Reptilia Corp. which features excellent comfort for CQC and prone shooting. Trigger has a 3.5lb pull.

UPPER PARTS

The charging handle is made from 7075-T6 barstool and milled to spec. It features our extended latch for working around your low profile optics. A milspec forward assist and a milspec dust cover provide nice black accents. 

BUFFER TUBE & STOCK

Our buffer tubes are CNC machined from 7075-T6 aluminum and are significantly stronger then generic forged 6061 tubes. Our castle nut is properly torqued and staked to prevent movement. The endplate has a Phosphate finish and features ambidextrous loops for sling attachments. The buffer is 3oz and the spring is made from music wire steel. The milspec polymer stock is made in the USA and features ambidextrous quick disconnect points for sling mounts in addition to the bottom loop mount.

 

Build Overview Features:

  • PMT-15 7075 Billet PAMAX Tactical Lower Receiver
  • 7075 Billet Matched Upper Receiver
  • 6061 Matched Billet MLOK 13" Handguard
  • 16" Nitride 5.56 NATO Caliber Barrel ( Compatible with 5.56/.223 ammunition)
  • XSlick Woodland BCG 
  • Hades Hybrid Muzzle Device
  • Carbine Length Gas System w/CNC Steel Gas Block
  • Tuned Trigger - 3.5lbs
  • Reptilia Corp Pistol Grip
  • (1) 20rd ACS Gray Magazine
  • Milspec forward assist
  • Extended charging handle
  • Integrated QD 
  • Ambi Sling Plate
  • ATIBAL XP6 Scope and WARNE Mount(NOT INCLUDED/ SOLD SEPARATELY)

 

*** Please note, this is a restricted item and must ship to a Federally licensed gun dealer.  Item will ship with a copy of our FFL for your dealer records.  You will have an opportunity to upload a copy of your dealer's FFL at checkout.  If you do not have a copy, simply have your dealer email a copy to sales@pmtactical.com along with the order number.  You order will not ship until we have a copy of the receiving dealer's FFL on file.