Description
Must be 18 or older to purchase.
This PAMAX Tactical Inc. AR-15 Rifle offers a superior quality finish and is built with components that are made in the proudly USA. Designed to provide precision and reliability that your life depends on. This rifle offers a a sub 1" MOA @ 100yards while keeping a sleek look that is sure to turn heads. All of our firearms come with a warranty which we stand behind. These rifles are designed to withstand abuse, offer high quality USA parts, and outperform the competition, all while staying within a pricepoint that is affordable.
RECEIVER SET:
Our in house machined AR15 billet lower/upper receivers are machined from a solid brick of 7075-T6 aluminum to provide a higher quality tier over 6061-T6. All of the critical features and dimensions are cut in a single operation, ensuring that every receiver is perfectly in spec. We then broach the magazine well for a perfect magazine fit, hand deburr, and tumble before coating. These builds also have an integrated ambidextrous bolt catch, offering a functional and sleek feature. The receiver bolt catch holes are threaded for included screws, eliminating your standard roll pin. The rear detent is also retained by a threaded cap screw making maintenance a breeze.
Our billet uppers are also made from 7075-T6 aluminum and are matched with the lower. The upper features a forward assist and is built to withstand heavy use.
HANDGUARD:
The upper receiver is paired with a 13” 6061-T6 CNC machined billet handguard. The MLOK handguard features superior tensile strength and is designed to endure heavy impact without throwing your iron sights or optic out of alignment. The handguard mates direct to the upper and features anti-rotational tabs. The handguard is installed using our steel low profile barrel nut which requires no timing as it fits under the gas system.
BARREL:
The 16" barrel is produced from raw bar stock to finished product. The barrel is properly stress relieved after rifling, and extensions are torqued after nitride. Superior quality control system ensures that all barrels are dimensionally correct and bores fall well within their individual tolerance.
Barrel Specs:
- 16" Length
- 5.56 NATO Chamber
- Carbine Gas System
- .750" Gas Block Journal
- .076" Gas Port Size
- 1:7 RH Twist
- 4150 CMV
- Threaded 1/2-28
- Stress relieved after rifling
- H&M Black Nitride Finish
- M4 Extension
- Weight: 29.0 ounces
- 100% USA Made
BOLT CARRIER GROUP:
Properly Built. No Corners Cut. 100% USA Made. Lifetime Guarantee. The BCG is a critical component with the most moving parts. We designed these BCG to run and run hard. Better yet, we coated the carrier in our performance XSlick "Spectrum" coating to increase cyclic rate, decrease friction, provide ease of cleaning and offer better resistance to heat and the elements.
BCG Specs:
8620 M16 style carrier with XSLICK Finish
Properly heat treated
Final grind before plating
9310 or S7 5.56/.223 bolt
Heat treated
Shot peened
H&M Black Nitride finish
MPI
4140 billet gas key
Properly seated with Grade 8 fasteners
Properly staked to ensure reliability
4140 Cam Pin nitride treated for wear resistance
Billet Machined Extractor
Machined from solid 4140 bar stock, heat treated and shot peened
Phosphate coated for reliable extraction
Extractor insert included
O-Ring included
Firing pin precision machined from 17-4 H-900 Stainless Steel
100% USA Made
MUZZLE DEVICE:
Our Crusader Muzzle Device is made in house and is a muzzle brake by design. The Crusader provides a balanced performance between control of muzzle rise, reduced felt recoil and reduced gas blowback while keeping the volume at an acceptable level.
GAS SYSTEM:
The .750 gas block is machined from 4140 pre-hardened steel with H&M Black Nitride coating. The gas tube is machined from seamless stainless steel tubing. As always you have comfort that even the smaller parts are USA Made.
LOWER PARTS
Contained within the lower we use 100% USA Made parts, all the way down to the very spring and detent. This milspec parts kit includes a trigger and hammer made from 8620 Steel Phosphate coated. We tune all our triggers at installation to ensure a crisp, no slop, trigger pull. The fire control group is secured with a set of our anti-walk pins. The pistol grip is upgraded to our X-Grip which features laser cut finger relief and a gritty texture that ensures retention even in the most wet and muddy environments.
UPPER PARTS
The charging handle is made from 6061-T6 barstool and milled to spec. A milspec forward assist and a “Hatch" clear poly duct cover installed. The dust cover is rated for heat and offers a nice view of the XSlick BCG.
BUFFER TUBE & STOCK
Our buffer tubes are CNC machined from 7075-T6 aluminum and are significantly stronger then generic forged 6061 tubes. Our castle nut is properly torqued and staked to prevent movement. The endplate has a Phosphate finish and features ambidextrous loops for sling attachments. The buffer is 3oz and the spring is made from music wire steel. The milspec polymer stock is made in the USA and features ambidextrous quick disconnect points for sling mounts in addition to the bottom loop mount.
Build Overview Features:
- PMT-15 7075 Billet PAMAX Tactical Lower Receiver
- 7075 Billet Matched Upper Receiver
- 6061 Matched Billet MLOK 13" Handguard
- 16" Nitride 5.56 NATO Caliber Barrel ( Compatible with 5.56/.223 ammunition)
- XSlick Spectrum BCG
- Crusader Muzzle Brake
- Carbine Length Gas System w/CNC Steel Gas Block
- Anti-Walk Pins
- Tuned Trigger - Milspec
- X-Grip Pistol Grip
- (1) Fakelite Magpul 30rd PMag
- Milspec forward assist
- Milspec charging handle
- PRI Fixed Iron Sight Set (NOT INCLUDED)
*** Please note, this is a restricted item and must ship to a Federally licensed gun dealer. Item will ship with a copy of our FFL for your dealer records. You will have an opportunity to upload a copy of your dealer's FFL at checkout. If you do not have a copy, simply have your dealer email a copy to sales@pmtactical.com along with the order number. You order will not ship until we have a copy of the receiving dealer's FFL on file.
