Description
A stunning red that makes this BCG one our our most popular.
What is XSlick? A proprietary coating yielding a longer BCG life cycle, an ease of cleaning, less friction, less perceived recoil, impervious to chemical cleaners, doesn't crack or chip and at a economical price point.
PAMAX XSlick USA Full Cut BCG vs. Nickel Boron (NiB) & NP3
***Nickel Boron (NiB) & NP3 are a nickel plating A major negative side to these applications is that chipping and cracking will occur during the lifetime of its use. Cracking and chipping have been found to occur even with brand new Nickel Boron (NiB) BCGs that have been dry fired only a few times.
***XSlick coating is applied to raw, blasted metal. It adheres to the surface filling all uneven areas, even on a microscopic level. Xslick is guaranteed to never crack or chip.
***Nickel Boron (NiB) is advertised as a "self-lubricating" BCG. This is a sales gimmick and utterly false. (NiB) molecular structure has numerous high points similar to points on a comb. These high points provide a coefficient of friction of roughly .10 however after roughly (1000) cycles the "self-lubricating" high points wear down and the coefficient of friction increases to a .20+
***Nickel Teflon or NP3 bolt carriers usually has a fluctuating coefficient of friction between .08 & .10 This is because the smooth teflon molecules look like small bubbles frozen in place and the number of teflon molecules exposed fluctuates as the coating wears. However, NP3 Bolt Carriers are expensive and still crack and chip.
***XSlick coating is a static .10 coefficient of friction throughout its complete life cycle. Our XSlick coated BCG are yielding cyclic life of up to +6500rds.They NEVER crack or chip and are reasonably priced.
*** All bolt carriers require oil to function at best results. However, Xslick requires less lubricant then NiB and NP3 BCG's making them ideal to run with suppressed systems.
***XSlick can withstand up to 1200 degrees of heat without failure.
***Nickel Boron lasted 48 hours in a corrosion test. NP3 lasted only 96 hours in the corrosion test.
***XSlick lasted over 200 hours in the corrosion test!
***XSlick BCG CAN be re-coated. If you manage to shoot 6500 rounds through your XSlick coated BCG PAMAX Tactical will have their Full Cut M16 Bolt Carrier Group coated again for a small service charge. Other NiB and NP3 carriers are a one-time application. If your coating cracks, chips or wears you have to buy a new carrier!
***XSlick can be applied in various colors.
Friction coefficient Chart: (dry against steel)
High Phos Electroless Nickel = .38
Hard Chrome = .21
Nickel Boron (NiB) = .10 ^ .20 Increase
Nickel Teflon (NP3) = .08 - .10 Fluctuating
XSlick Coating = .10 Static (May increase slightly based on the color option.)
XSLICK
*Impervious to chemical cleaners
* Coefficient of friction higher then NiB and equal to NP3.
* Inexpensive re-coat to save your BCG
*Rated for temperatures excess of 1200 degrees.
* x4 more resistant to corrosion then NiB & x2 more than NP3.
*Life cycle of +6500rds.
XSlick is applied exclusively to PAMAX Tactical Full Cut M16 Bolt Carrier Groups.
BOLT CARRIER GROUP SPECIFICATIONS :
Each of our Mil-Spec Bolt Carrier Group Assemblies is made in the U.S.A. and feature full-auto capability, a shot peened MPI Bolt, 8620 Gas Carrier and Gas Key fastened with hardened Grade 8 fasteners. The ultra-hard XSlick outer coating has an undercoat of Maganese Phosphate which retains lubrication and ensures this BCG's continued reliability and precision. A harder stainless steel cam pin is used for reduced wear. The Extractor is Phosphate coated and placed in a Nickel Boron Bolt for the best combo of efficiency and ease of cleaning while reducing extraction failures.
Features:
MPI (Magnetic Particle Inspected) Nickel Boron Coated 9310 Steel Bolt.
Ground per True Military Specifications (Not weened).
Chrome Lined 8620 Carrier (M16 full shroud) Heat Treated Case Hardened Steel.
Gas Key Hardened to USGI Specifications.
8640 Steel Chrome Plated Firing pin.
Stainless Steel Cam Pin
Grade 8 Hardened Fasteners.
Chrome Lined Gas Key Staked Per Mil-Spec
Tool Steel Extractor with Phosphate Finish
Rose Gold Ejector
Weight: 11.456 oz
