Product Overview
XSlick is a proprietary coating engineered to deliver a longer BCG life cycle, easier cleaning, less friction, less perceived recoil, and complete imperviousness to chemical cleaners—all without cracking or chipping, at an economical price point.
XSlick is applied exclusively to PAMAX Tactical Full Cut M16 Bolt Carrier Groups.
XSlick vs. Nickel Boron (NiB) & NP3
| Feature | Nickel Boron (NiB) | NP3 (Nickel Teflon) | XSlick |
|---|---|---|---|
| Coating Type | Nickel plating applied over surface | Nickel Teflon plating | Applied to raw, blasted metal—fills all uneven areas, even on a microscopic level |
| Cracking / Chipping | Yes—occurs even on brand-new BCGs after only a few dry fires | Yes | Never—guaranteed to never crack or chip |
| Coefficient of Friction | .10 initially, increases to .20+ after ~1,000 cycles | .08–.10 (fluctuating as Teflon molecules wear) | .10 static throughout complete life cycle |
| Lubrication | Marketed as "self-lubricating" (false—high points wear down) | Requires oil | Requires less lubricant than NiB & NP3—ideal for suppressed systems |
| Heat Resistance | — | — | Up to 1,200°F without failure |
| Corrosion Resistance | 48 hours | 96 hours | 200+ hours |
| Life Cycle | Coating degrades after ~1,000 cycles | Coating degrades over time | 6,500+ rounds |
| Re-Coating | Not available (one-time application) | Not available (one-time application) | Available for a small service charge |
| Color Options | — | — | Multiple colors available |
Friction Coefficient Comparison
Dry against steel:
| Coating | Coefficient of Friction |
|---|---|
| High Phos Electroless Nickel | .38 |
| Hard Chrome | .21 |
| Nickel Boron (NiB) | .10 → .20+ (increasing) |
| Nickel Teflon (NP3) | .08–.10 (fluctuating) |
| XSlick Coating | .10 static (may increase slightly based on color option) |
Key Benefits
- Impervious to chemical cleaners
- Coefficient of friction equal to or better than NiB and NP3
- Inexpensive re-coat option to extend BCG life
- Rated for temperatures in excess of 1,200°F
- 4× more corrosion resistant than NiB & 2× more than NP3
- Life cycle of 6,500+ rounds
- Never cracks or chips—guaranteed
- Available in multiple colors
Re-Coating Service
If you manage to shoot 6,500 rounds through your XSlick coated BCG, PAMAX Tactical will have your Full Cut M16 Bolt Carrier Group re-coated for a small service charge. Other NiB and NP3 carriers are a one-time application—if the coating cracks, chips, or wears, you have to buy a new carrier.
Bolt Carrier Group Specifications
Each of our Mil-Spec Bolt Carrier Group Assemblies is made in the U.S.A. and features full-auto capability, a shot-peened MPI Bolt, 8620 Gas Carrier and Gas Key fastened with hardened Grade 8 fasteners. The ultra-hard XSlick outer coating has an undercoat of Manganese Phosphate which retains lubrication and ensures continued reliability and precision. A harder stainless steel cam pin is used for reduced wear. The Extractor is Phosphate coated and placed in a Nickel Boron Bolt for the best combination of efficiency and ease of cleaning while reducing extraction failures.
| Bolt | MPI (Magnetic Particle Inspected) Nickel Boron Coated 9310 Steel |
| Bolt Grinding | Ground per True Military Specifications (not weened) |
| Carrier | Chrome Lined 8620 Steel (M16 full shroud), heat treated case hardened |
| Gas Key | Hardened to USGI Specifications, chrome lined, staked per Mil-Spec |
| Firing Pin | 8640 Steel, chrome plated |
| Cam Pin | Stainless steel |
| Fasteners | Grade 8 hardened |
| Extractor | Tool steel with Phosphate finish |
| Ejector | Rose Gold |
| Weight | 11.456 oz |
33 Reviews
-
BCG
Very well built and looks fantastic in my wife’s AR
-
XSLICK BCG
Amazing quality! Pamax Tactical and Customer service are top notch!
-
XSlick BCG
I recently purchased this BCG after reading several good reviews. What I noticed first was the cool color options PAMAX offers. After reading what type of performance was to be expected from these units I couldn’t help but give them a try. I have cycled many rounds out of 6.5 Grendel with ZERO ejection issues. I have had no problems with “soft loading” and have never had to use the forward assist. I run the cheap Wolf steel case ammo for the most part, but do occasionally run the higher end brass loads when I can find them. In closing this bolt carrier group is a VERY high end unit at a reasonable price. I highly recommend this product to everyone looking to enhance their AR-15. Two thumbs up from me!
-
Nice BCG
This BCG works great, the metallic OD green is a cool color and looks nice. I could do without the laser engraved X Slick on the side of the BCG that is seen, but its advertising, I get it.
-
Love it.
Super smooth and looks amazing. I had high expectations and they were exceeded. I contacted customers service about the status of another order, they were extremely helpful and answered all my questions. I will be buying more parts in the future.
-
Gold BCG
EXCELLENT workmanship and so Reasonably priced I purchased 2. They look great and function GREAT. You won’t go wrong with these.
-
I love these BCG’s
This is my second one and I will most likely get another. They look great and run Awsome!!
-
I bought this midnight xslick bcg for my brother. …
I bought this midnight xslick bcg for my brother. He was going to order one composed of nickel boron. I told him, I don't think so. He loves this bcg. Xslick is the way to go. I have a blue one, gonna order a red one very soon. Not a bot. Don't work here. Real person. Lol. Get it cause you want it. Keep it cause you love it. These are built to last.
-
Hey, I wanted to let you know I received my lower …
Hey, I wanted to let you know I received my lower parts kit and BCG and I am very impressed with both items. That BCG is nothing short of stunning though, you should be quite proud of offering products as nice as that. I look forward to buying from you in the future
