PAMAX Tactical Magnetic Buffer System (MBS-R10) for AR10 / DPMS Recievers.
— Powered by Frytech Technology
The Magnetic Buffer System (MBS) is a next-generation recoil management solution, combining patented Frytech Technology with enhanced spring engineering to deliver superior shooting performance for the AR10 platform.
The AR10 Recoil Problem—Solved with Magnetic Dampening.
Large-frame AR platforms produce significantly more recoil energy and mechanical turbulence than their AR15 counterparts. The MBS-R10 takes the proven PAMAX magnetic damping system and recalibrates it for the demands of .308, 6.5 Creedmoor, .243 Win, .260 Rem, .300 Win Mag and other DPMS-pattern calibers.
If you want flatter shooting, faster recovery to target, and more rifle behavior, the MBS-R10 is the modern recoil solution.
Magnetic Damping Optimized for Heavy-Caliber Rifles
The magnetic recoil system absorbs and distributes recoil energy more smoothly than spring-based buffers—ideal for high-power cartridges used in AR10 / DPMS Platforms.
Rifle-Length System = Maximum Space for Maximum Stability
Engineered for rifle-length receiver extensions to provide consistent recoil impulse, improved cycling, and optimized bolt travel. Rifle tubes provide the space to use more magnets that are specifically tuned to handle the heavier weight of the AR10 / DPMS Bolt Carrier Group in order to tune one of the most comfortable recoil control options on the market.
Reduced Muzzle Rise & Faster Follow-Up Shots
Shoot flatter, track your target better, and stay ready for the next shot with less optic displacement. The magnetic dampening keeps your reticle closer to target making follow up shots faster and more effective.
Lower Wear. Less Friction. Longer Life.
The magnetic system minimizes friction points and mechanical fatigue—helping your rifle operate cleaner and last longer.
Precision-Built for AR10 / DPMS Pattern Receivers
Machined in the USA. The MBS-R10 is plug and play, easy installation, simply install like a factory buffer tube, pull the pin and start shooting.
MBS-R10 Ideal Use
• Long-range shooters needing fast second-shot control.
• DMR and precision gas rifle setups.
• Suppressed rifle users.
• Battle Rifle large caliber builds.
Why It’s Different
Traditional buffer systems rely solely on round-wire compression springs—functional, but not optimized for peak performance. The MBS takes a hybrid approach, using staggered magnetic fields alongside precision-tuned springs to dramatically reduce felt recoil and muzzle rise.
By staging magnetic resistance, the MBS absorbs bolt carrier inertia in multiple phases—each calibrated for the mass and velocity of your specific caliber. This progressive damping delivers faster follow-up shots, better control, and less shooter fatigue.
MBS is quieter then a traditional AR10 buffer system and gets rid of the annoying "twang" from the milspec spring.
If you are a fan of a flash hider as a muzzle device then the MBS is for you. Usually people opt for a muzzle brake or compensator instead of a flashider because it offers more stability and less felt recoil. The MBS now does this for you on the back end of the rifle allowing the use of a flash hider to be more balanced and beneficial for use. This is especially true for those that use a flash hider combo for suppressed systems.
Offers the option of not using a muzzle brake or compensator and not dealng with obnoxious muzzle concussion or heavy gas blowback. Or if that is not a factor you can use in conjunction with your muzzle brake for increased recoil reduction.
The MBS thrives when using suppressors. Suppressors increase gas pressure and max out traditional springs, requiring heavier buffers that slow the rate of fire. Suppressors typically increase mechanical recoil and this is easily mitigated by use of the magnetic fields.
Precision Built in the USA
- Rifle Length 7075-T6 Aluminum CNC-Milled Buffer Tube — Stronger than standard mil-spec tubes
- Integrated Frytech Magnetic Technology — Built into the tube for seamless operation
- Caliber-Specific Tuning — The MBS-R10 is tuned for larger calibers including .308/7.62x51, 6.5 Creedmore , .300 Win Mag & More.
Compatibility
- Fits all mil-spec AR10 & DPMS lowers
- Tuned for .308/ 7.62x51 & 6.5 Creedmore
- Compatible with FRT Triggers
- Compatible with Super Safety (may require modification to detent spring.)
- Works with all Rifle A2 mil-spec stock systems
- Compatible with buffer retainers
- Replaces buffer tube, buffer, and spring
- This is an A2 Rifle Tube and does not require a castle nut or endplate.
- Maintains normal AR10 receiver takedown.
Installation
The MBS is a true drop-in replacement. Install it like any other A2 mil-spec tube, then pull the release tab to activate the system.
Torque spec: A2 Buffer Tube — 35 ft-lbs
Important: The MBS is not designed for disassembly. High-power magnets inside can cause injury if mishandled. Tampering voids the warranty. Use caution during installation or removal (vice and included tools required for install). See videos for more resources.
Experience magnetic recoil control — faster, flatter, and smoother shooting with the PAMAX MBS-R10.
